Braking is an important part of controlling electric vehicle safety. If it is too loose or too tight, it is not easy to use. It is easier to use only when it is adjusted to your own tightness. Let's take a look at how to adjust the brakes of electric cars.

Check the brake stroke: the stroke is too large and the braking effect is poor. It is impossible to stop in an emergency, so it is necessary to adjust the brake travel. The travel of the brake handle should be reduced to the normal range.

Electric vehicle brake cable fixing screw: the brake line fixing screw is used to tighten the brake line and adjust the travel of the brake handle. When adjusting the fixing screws of the brake line, please loosen them a little, not all. If they are completely loosened, the brake line may fall off.

Adjust the fixing screw of the electric vehicle brake line, loosen the adjusting brake line fixing screw with a wrench, and pull the brake line.

Pull the brake line, loosen the screw adjusting the brake line, hold the brake line with your right hand and pull it back a little.

Wholesale of electric motorcycles reminds you to tighten the fixed screws of the brake line, adjust and tighten the screws of the brake line with a wrench, and do not damage the screws. The above is the brake adjustment of electric vehicles. When we just bought the brake, the electric motorcycle wholesaler would debug it for us. Usually, this kind of brake failure will not occur. It is possible only after long-term use. If it is not too complex, we can adjust it by ourselves. Attention should also be paid to new energy vehicles.

The above is the method of adjusting the brake of electric vehicles explained by the electric motorcycle batch. I hope it will be helpful to you. If you want to know more about new energy vehicles, electric vehicles and other related knowledge, you can pay attention to our news, and we will continue to update it.